Quantum PX720 Manuale di Installazione Scaricare il pdf (Pagina 8)

Quantum PX720 Unpacking and Installation Instructions

Document 6444602-04 A01

March 2005

8 Unpacking the Library

Unboxing the Library 0 To unbox the library:

1 Check the packing list and verify that all components have been received.

2 Choose the unloading side. The PX720 may be unloaded from only the

right side of the pallet.

3 Verify the minimum floor space requirements (see figure 5

Figure 5 Minimum Floor

Space Requirements—

Uncrating Site

4 Cut the two steel bands that secure the library and packing material to the

pallet (see figure 6

Note: If any part is missing or damaged (look for scuffs on the

antistatic bag), contact your authorized reseller.

Note: Uncrating the library requires a minimum of 3 feet (91 cm) on

all sides. For the side being used for the ramp, uncrating the

library requires an additional 7 feet (2.13 m) for a total of 10

feet (3.05 m) on that side. Figure 5

shows the minimum floor

space required by the PX720 at its uncrating site. The

minimum height required for unpacking the PX720 is 85

inches (2.16 meters). The crate occupies a footprint of 48 x 56

in. (122 x 142 cm).

Warning: The steel bands are under tension and will snap away when

cut. Wear safety goggles when cutting the steel bands.

3 ft. (91 cm)

3 ft.

(91 cm)

7 ft. (2.13 m)

Ramp side

Cabinet

front

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Nessun commento

Quantum PX720 Manuale di Installazione Pagina 8