Quantum ATL StackLink Specifiche Scaricare il pdf (Pagina 18)

Quantum|ATL StackLink™ Installation Instructions

Document 6421009-04, Ver. 4, Rel. 0

February 2002

18 Installing the Safety Blanking Panels

Installing the Safety Blanking Panels 0

To avoid personal injury or damage to the StackLink mechanism,

install safety blanking panels over all empty locations in the M1500

stack.

1 If the holes in the rack rails are square (untapped), insert caged

nuts into the holes where the front safety blanking panels will be

installed.

2 Install front safety blanking panels (212579) at the front of the rack,

securing each panel with two screws (YS42011) and washers

(YS40404).

3 Install rear safety blanking panels (212502) at the rear of the rack,

securing each panel with two screws (YS41964).

Cabling the Library 0

The library cabling procedure consists of the following steps:

• Interlibrary (control bus) cabling

• StackLink motor connection

• SCSI bus cabling

• Power cabling

Interlibrary (Control

Bus) Cabling

The intelligent control bus allows the individual libraries in the rack to

communicate. To connect this bus:

1 Connect the top M1500 module in the rack to the terminator on the

front of the motor assembly, using one of the library control bus

cables provided (PN AS3642).

2 Daisy chain the control bus as shown in figure 15, using the library

control bus cables provided (PN AS3642).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Nessun commento

Quantum ATL StackLink Specifiche Pagina 18