Quantum DAT 240 Loader Manuale Utente Scaricare il pdf (Pagina 37)

Drive Operation and Maintenance

LCD display backlighting

Backlighting on the LCD display is turned on automatically when the autoloader is

first powered on and whenever a front-panel button is pushed. The backlight remains

on for two minutes, and then shuts off automatically (unless a front-panel button is

pressed).

LCD display messages

The table on the following pages describes the messages that may be shown on the

LCD display. The messages are listed in alphabetical order. An “X” indicates the

number of the currently active cartridge slot.

LCD Message Description

CASSETTE INSTALL PROBLEM A cartridge has been inserted into the magazine incorrectly.

Eject the magazine from the autoloader (see page A-18); then

remove the cartridge from the magazine and reinsert it

correctly.

CHECK DOOR The autoloader door is open.

CLEANING The autoloader is loading a cleaning cartridge into the drive.

CLEANING REQUIRED The tape drive requires cleaning.

DOOR LOCKED The autoloader door is locked.

DOOR UNLOCKED The autoloader door is unlocked.

DRIVE ERROR

04/XX/XX

There is a problem with the tape drive. For additional

information, contact Seagate technical support.

ERASE TAPE X The tape drive is erasing the tape cartridge from slot X.

EJECTING MAGAZINE The autoloader is ejecting the tape magazine.

EJECT?

PRESS ENTER

A tape resides in the drive and the Eject button has been

pressed. Eject confirmation is required before the tape can be

ejected.

EJECT PREVENT The autoloader is preventing you from ejecting the magazine

because the software has enabled PMR (Prevent Media

Removal).

FAN FAILURE There is a problem with the autoloader fan. Contact Seagate

technical support.

INSERT EMPTY MAGAZINE The autoloader cannot unload a tape from the tape drive to the

magazine because the magazine in the autoloader is fully

loaded. Eject the magazine; then insert an empty magazine into

the autoloader. For more information on ejecting a magazine,

see “Ejecting the magazine” on page A-18.

LOADER ERROR

04/XX/XX

There is a problem with the autoloader hardware. For additional

information, contact Seagate technical support.

LOAD TAPE X The tape drive is loading the tape cartridge from slot X.

MEDIA ERROR

03/XX/XX

There is a problem with the tape cartridge. For additional

information, contact Seagate technical support.

NO MAGAZINE There is no magazine in the autoloader.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 50 51

Commenti su questo manuale

Nessun commento

Quantum DAT 240 Loader Manuale Utente Pagina 37

Commenti su questo manuale

Prodotti e manuali riguardandi Unità a nastri magnetici Quantum DAT 240 Loader